|
|
Hydrostatic, deformation and piston pressure gauges
Gregor, Kamil ; Turygin, Andrei (referee) ; Hammer, Miloš (advisor)
This bachelor thesis deals with barometers, especially the principle of their function. The topic of this thesis is hydrostatic barometers, which work on the principle of hydrostatic power; deformation barometers, which measure pressure on the basis of elastic deformation; and finally force barometers, which measure force derived from the pressure applied on a specific area inside the barometer. The first part of the thesis focuses on diagnostics using barometers. An example of practical application of diagnostics is presented, too. In the second part of the thesis there is a practical example of using barometers in diagnostics.
|
|
|
Design of Blood Pressure Monitor
Běťáková, Vendula ; Řezníček, Svatopluk (referee) ; Fridrichová, Eva (advisor)
The goal of this bachelor thesis is a proposal design of blood pressure monitor, which should respect the functional requirements and conceptualize the technical and aesthetic aspects. The work includes a study of the current market situation and development of new technologies in the field. The proposal deals with an ergonomic design and issues.
|
|
|
Model of cleaning station for food processing technology controlled by a control system na PROFIBUS network.
Vyskočil, Jaromír ; Sobotka, Milan (referee) ; Pásek, Jan (advisor)
This bachelor’s thesis deals with design, realization and laboratory commissioning of the model of keg / tank cleaning station (CIP) in foodstuff industry. The model uses two cleaning liquids – water and lye. There are several different types of valves used in the CIP model. They serves for inlet and outlet of lye or water and for separation of the both liquids branches. The control system offers monitoring of pressure, volume flow, level of the lye, etc. The measuring devises mostly communicate with PLC via industrial net PROFIBUS-DP and PA. The same net PROFIBUS-DP also provides communication between PLC and distributed control system Festo (valve island). Configuration and set up of the Festo valve island is described in the thesis as well. Further the work presents processing of the analogue values from different transmitters and their representation in a operator panel. Operator panel (OP) serves for control and visualization of the cleaning station. The OP configuration, the screens structure and the full functionality in the CIP station is explained. The individual screen description is incorporated as well. There are three modes of control – manual, semiautomatic and automatic. Automatic control is based on the recipe concept and the cleaning philosophy is split into several phases. The PLC control is presented in the form of flow diagrams algorithms and the program code in STEP7 is enclosed in attachment on CD ROM.
|
|
|
Verastile Sensor-based Experimental Platform
Tydor, Maximilián ; Ing. Vladimír Hubík, Ph.D. (Saab Czech s.r.o.) (referee) ; Šebesta, Jiří (advisor)
This document deals with issues of testing semiconductor inertial sensors like gyroscopes and accelerometers, but also other sensors like magnetometers, inclinometers and others for aviation navigation purposes where strict requirements cover every system. The goal of this thesis is to create modular test platform for testing wide variety of sensors in different combinations under variable circumstances. The development covers mechanical design, electrical design – hardware and also control algorithm – software.
|
|
|
Design of air pump
Gábriž, Michal ; Haltof, Vladimír (referee) ; Ondra, Martin (advisor)
The topic of this bachelor‘s thesis is design of air pump. The work includes an analysis of products and manufacturers, further it examines the current market situation and the technology used in this issue. The result of these analyzes are certain shortcomings and space for improvement. Based on the findings, it is created a custom design of the air pump, described in terms of aesthetic, structural and other aspects of design.
|
|
|
Design of air pump
Gábriž, Michal ; Haltof, Vladimír (referee) ; Ondra, Martin (advisor)
The topic of this bachelor‘s thesis is design of air pump. The work includes an analysis of products and manufacturers, further it examines the current market situation and the technology used in this issue. The result of these analyzes are certain shortcomings and space for improvement. Based on the findings, it is created a custom design of the air pump, described in terms of aesthetic, structural and other aspects of design.
|
|
|
The Analysis of the influence of sports massage back blood presure for the students of physical education PF JU
ČAMROVÁ, Monika
The aim of the thesis is to analyze the impact of sports massage the back and its effect on blood pressure in students of physical education and sport. It measured 10 students who completed the 10 measurements during massage. Students were selected randomly by drawing lots. The results of measuring their blood pressure are presented anonymously. Blood pressure was measured by means of a digital pressure gauge on the arm. The students were measured before the massage, during the massage, right after the massage and after five minutes of resting. The measurement results are shown in Tables and their mean value graphing. Overall measurement showed that massage can affect the range of blood pressure in a small extent. The effects of massage on the lymphatic and blood circulation are noticeable to the human body.
|
|
|
Model of cleaning station for food processing technology controlled by a control system na PROFIBUS network.
Vyskočil, Jaromír ; Sobotka, Milan (referee) ; Pásek, Jan (advisor)
This bachelor’s thesis deals with design, realization and laboratory commissioning of the model of keg / tank cleaning station (CIP) in foodstuff industry. The model uses two cleaning liquids – water and lye. There are several different types of valves used in the CIP model. They serves for inlet and outlet of lye or water and for separation of the both liquids branches. The control system offers monitoring of pressure, volume flow, level of the lye, etc. The measuring devises mostly communicate with PLC via industrial net PROFIBUS-DP and PA. The same net PROFIBUS-DP also provides communication between PLC and distributed control system Festo (valve island). Configuration and set up of the Festo valve island is described in the thesis as well. Further the work presents processing of the analogue values from different transmitters and their representation in a operator panel. Operator panel (OP) serves for control and visualization of the cleaning station. The OP configuration, the screens structure and the full functionality in the CIP station is explained. The individual screen description is incorporated as well. There are three modes of control – manual, semiautomatic and automatic. Automatic control is based on the recipe concept and the cleaning philosophy is split into several phases. The PLC control is presented in the form of flow diagrams algorithms and the program code in STEP7 is enclosed in attachment on CD ROM.
|
|
|
Verastile Sensor-based Experimental Platform
Tydor, Maximilián ; Ing. Vladimír Hubík, Ph.D. (Saab Czech s.r.o.) (referee) ; Šebesta, Jiří (advisor)
This document deals with issues of testing semiconductor inertial sensors like gyroscopes and accelerometers, but also other sensors like magnetometers, inclinometers and others for aviation navigation purposes where strict requirements cover every system. The goal of this thesis is to create modular test platform for testing wide variety of sensors in different combinations under variable circumstances. The development covers mechanical design, electrical design – hardware and also control algorithm – software.
|
|
|
Hydrostatic, deformation and piston pressure gauges
Gregor, Kamil ; Turygin, Andrei (referee) ; Hammer, Miloš (advisor)
This bachelor thesis deals with barometers, especially the principle of their function. The topic of this thesis is hydrostatic barometers, which work on the principle of hydrostatic power; deformation barometers, which measure pressure on the basis of elastic deformation; and finally force barometers, which measure force derived from the pressure applied on a specific area inside the barometer. The first part of the thesis focuses on diagnostics using barometers. An example of practical application of diagnostics is presented, too. In the second part of the thesis there is a practical example of using barometers in diagnostics.
|
guest ::
